FM600-D6 Series Pneumatic Fully Fluorine-lined Butt Clamp Butterfly Valves
Basic Description
Nominal Diameter : DN40~600mm
Fully lined lining, strong corrosion resistance, aging resistance, wear resistance.
Dovetail groove structure, uniform perforation of valve parts, strong adhesion and long service life.
Compression molding, chemical stability, not easy to fall off, good anti-fouling and anti-sticking.
Smooth inner wall, low resistance, high CV value, strong fluidity, zero leakage.
Small size, light weight, safe and stable, light operation, easy to install.
Technical Parameters
Technical Parameter |
DN | DN40~600mm(Other port size, please indicate when ordering) |
Nominal Pressure | 1.0-1.6Mpa ( lf need other standard、please indicate when ordering ) |
Body Material | Ductile Iron(Q)、Carbon Steel(C)、Stainless 304(P) |
Seal Material | PTFE(F) |
Media Temperature | W2:-20~150℃ |
Connection Mode | Butt Clamp |
Lined Material | Teflon FEP(F46), PFA |
Pneumatic Actuatcr | FMAT Series、FMAW Series、JLGT Series、lmport actuator series |
Interaction Way | Double action、Single acting normally closed、Single acting normally open |
Notes: Other special sealing material or special temperature can choose by customer's design.
Installation Size
PNEUMATIC OVERALL MEASUREMENT CHART- PN16 (16bar)
DN | Outline Size | Connection Size1.6 | Actuator Model |
L | L1 | L2 | H1 | H2 | D1 | D2 | N-D | |
40 | 43 | 215 | 105 | 172 | 110 | 110 | 88 | 4-18 | FMATD83/ FMATE83 |
50 | 43 | 215 | 105 | 172 | 110 | 125 | 102 | 4-18 | FMATD83/ FMATE83 |
65 | 46 | 215 | 105 | 185 | 110 | 145 | 122 | 8-18 | FMATD83/ FMATE83 |
80 | 46 | 215/265 | 105/110 | 215 | 110/120 | 160 | 138 | 8-18 | FMATD83/ FMATE92 |
100 | 52 | 265/270 | 110/125 | 265 | 120/142 | 180 | 158 | 8-18 | FMATD92/ FMATE105 |
125 | 56 | 270/310 | 125/142 | 270 | 142/158 | 210 | 188 | 8-22 | FMATD105/ FMATE125 |
150 | 56 | 310/400 | 142/160 | 310 | 158/178 | 240 | 212 | 12-22 | FMATD125/ FMATE140 |
200 | 60 | 400/465 | 160/178 | 400 | 178/200 | 295 | 242 | 12-26 | FMATD140/ FMATE160 |
250 | 68 | 465/550 | 178/210 | 465 | 200/235 | 355 | 268 | 12-26 | FMATD160/ FMATE190 |
300 | 78 | 550/550 | 210/235 | 550 | 235/260 | 410 | 295 | 12-26 | FMATD190/ FMATE210 |
350 | 78 | 550/646 | 235/258 | 550 | 260/325 | 470 | 320 | 16-26 | FMATD210/ FMATE240 |
According to different torques, different air source pressures and different actual working conditions, select the corresponding actuator and its relevant external dimensions also change. Model Description Model Denotation Mode FM | Company Brand |
-600 | Pneumatic |
-D6 | Full Fluorine Lined Butterfly Valve |
-C7 | Butt Clamp |
-F46 | Full Lined FEP |
-16 | Nominal Pressure |
-P | Stainless 304 |
-200 | Nominal Diameter |
-E1 | Single Action Normal Close |
-B | Exd Ⅱ BT4 |
-W2 | -20~150℃ |
-B4 | 2 Bits 5 Way Explosions Proof Solenoid Valve |
-B7 | Explosion Proof Limit Switch |
Product Usage Our valves have been widely used in the upstream field of oil and gas. Today, oil and gas wellhead pressure can reach up to 20Kpsi, and H2S and CO2 under high temperature conditions, sand impurities, etc. have caused very challenging working conditions. Chemical injection, water injection and other methods are widely used in fracturing and oil recovery technology in the process of shale gas production, which increases the corrosion resistance requirements of valve products. Professional design, accurate material selection (metal seal and soft seal), and advanced surfacing and surface treatment technologies enable our product quality and process to continuously meet the requirements of increasingly severe working conditions.