Quantity: | |
---|---|
FOTMA
motors, motor stator, copper bars,etc.
Uniform color, no foreign matter, loose powder
Carton packaging
Indicator name | Skills requirement | Indicator name | Skills requirement |
Membrane appearance | The film is flat and the color meets the specified color difference range | Alkali resistance(5%Na0H) | 240h NA |
hardness ≥ | 2H | Acid resistance(3%HCL) | 240h NA |
Attached Focus / Level≤ | 0 | Boiling water resistance | 240h NA |
Resistance to shock/ kg*cm | Positive rush reverse rush 50 | Humidity and heat resistance | 500h NA |
Bending test/mm | 1 | Film thickness | 70 um -120 um |
Cupping test/ mm | 6 | Gloss(60° ) | According to customer requirements |
Salt spray resistance(800h) | Marking point: one-way rust ≤2.0mm; Unlined area: No difference | Volume resistivity 2. cm≥ | 5X10^15 |
Electric strength MV. mm-1≥ | 40 |
Indicator name | Skills requirement | Indicator name | Skills requirement |
Color and art effect | According to customer requirements | Density(25℃) | 1. 3-1.8g/cm³ |
Residue on sieve (125um) | All passed | Non-volatile content | >99. 4% |
State in the container | Uniform color, no foreign matter, loose powder | Curing time | 180- 200°C * 15 -20min |
Indicator name | Skills requirement | Indicator name | Skills requirement |
Membrane appearance | The film is flat and the color meets the specified color difference range | Alkali resistance(5%Na0H) | 240h NA |
hardness ≥ | 2H | Acid resistance(3%HCL) | 240h NA |
Attached Focus / Level≤ | 0 | Boiling water resistance | 240h NA |
Resistance to shock/ kg*cm | Positive rush reverse rush 50 | Humidity and heat resistance | 500h NA |
Bending test/mm | 1 | Film thickness | 70 um -120 um |
Cupping test/ mm | 6 | Gloss(60° ) | According to customer requirements |
Salt spray resistance(800h) | Marking point: one-way rust ≤2.0mm; Unlined area: No difference | Volume resistivity 2. cm≥ | 5X10^15 |
Electric strength MV. mm-1≥ | 40 |
Indicator name | Skills requirement | Indicator name | Skills requirement |
Color and art effect | According to customer requirements | Density(25℃) | 1. 3-1.8g/cm³ |
Residue on sieve (125um) | All passed | Non-volatile content | >99. 4% |
State in the container | Uniform color, no foreign matter, loose powder | Curing time | 180- 200°C * 15 -20min |