Products

News

You are here: Home » Products » Other Products » Heating Elements » L Bent MoSi2 Heating Elements

Product Category

loading

Share to:

L Bent MoSi2 Heating Elements

The cold ends (Lu) of the Moly-D Elements can be bent 30A。, 45Ao or 90A0. This permits the installation of more than one layer of elements on a wall of a furmace with a high chamber. Most are bent in the cold end (Lu) but they can also be bent in the hot section (Le).
Quantity:
  • L Bent
  • FOTMA
L bent MoSi2 heating elements

  The cold ends (Lu) of the Moly-D Elements can be bent 30A, 45Ao or 90A0. This permits the installation of more than one layer of elements on a wall of a furmace with a high chamber. Most are bent in the cold end (Lu) but they can also be bent in the hot section (Le).
 
L bent MoSi2 heating elements

  Molybdenum disilicide MoSi2 heating elements are resistance type heating elements made of a dense ceramic- metallic material which can produce furnace temperatures approaching 1800°C. Although more expensive than traditional metallic elements, MoSi2 elements are known for their longevity due in part to a protective quartz layer that forms on the surface of the element“hot zone" during operation.
 
L bent MoSi2 heating elements

  Duralite MoSi2 elements are made to industry standard established resistance values, dimensions and geometries, and therefore are interchangeable with other manufacturers of molybdenum disilicide elements. The key difference between STA
MoSi2 and other MoSi2 suppliers is that STA MoSi2 elements are exceptionally priced.


L bent MoSi2 heating elements

L bent MoSi2 heating elements



Previous: 
Next: 
Feedback
QUESTION? LET US HELP.
Simple choose a support option from the icons below:
FOLLOW US ON:
Copyright © Hubei Fotma Machinery Co., Ltd. Site Map  1998-2021