On July 5th, seven 40HQ containers was fully loaded by 2 sets of complete 120TPD rice milling line. These rice milling machines will be dispatched to Nigeria from Shanghai port of China. FOTMA Machinery appreciate all the customers’ support and trust.
The starting quality of the paddy for rice milling is should be good and paddy should be at the right moisture content (14%) and have a high purity. Characteristics of a good quality paddya. uniformly mature kernelsb. uniform size and shapec. free of fissuresd. free of empty or half filled grainse.
1. Clean paddy after cleaning and destoningThe presence of poor-quality paddy lowers the total milling recovery. The impurities, straws, stones and small clays are all removed by cleaner and destoner, as well as those immature kernels or half-filled grains.
The rice mill mainly uses the force of mechanical equipment to peel and whiten the brown rice. When the brown rice flows into the whitening room from the hopper, the brown rice is squeezed in the whitening room due to the internal pressure of the thallium and the push of the mechanical force.
Rice Milling Facility’s ConfigurationsThe rice milling facility comes in various configurations, and the milling components vary in design and performance. “Configuration” refers to how the components are sequenced.
The flow diagram below represents the configuration and flow in a typical modern rice mill.1 - paddy is dumped in the intake pit feeding the pre-cleaner2 - pre-cleaned paddy moves to the rubber roll husker:3 - mixture of brown rice and unhusked paddy moves to the separator
On June 21st, all the rice machines for a complete 100TPD rice milling plant had been loaded into three 40HQ containers and would be shipped to Nigeria. Shanghai was locked down for two months due to suffered COVID-19. The client had to stock all his machines in our company.
On July 5th, seven 40HQ containers was fully loaded by 2 sets of complete 120TPD rice milling line. These rice milling machines will be dispatched to Nigeria from Shanghai port of China. FOTMA Machinery appreciate all the customers’ support and trust.
The starting quality of the paddy for rice milling is should be good and paddy should be at the right moisture content (14%) and have a high purity. Characteristics of a good quality paddya. uniformly mature kernelsb. uniform size and shapec. free of fissuresd. free of empty or half filled grainse.
1. Clean paddy after cleaning and destoningThe presence of poor-quality paddy lowers the total milling recovery. The impurities, straws, stones and small clays are all removed by cleaner and destoner, as well as those immature kernels or half-filled grains.
The rice mill mainly uses the force of mechanical equipment to peel and whiten the brown rice. When the brown rice flows into the whitening room from the hopper, the brown rice is squeezed in the whitening room due to the internal pressure of the thallium and the push of the mechanical force.
Rice Milling Facility’s ConfigurationsThe rice milling facility comes in various configurations, and the milling components vary in design and performance. “Configuration” refers to how the components are sequenced.
The flow diagram below represents the configuration and flow in a typical modern rice mill.1 - paddy is dumped in the intake pit feeding the pre-cleaner2 - pre-cleaned paddy moves to the rubber roll husker:3 - mixture of brown rice and unhusked paddy moves to the separator
On June 21st, all the rice machines for a complete 100TPD rice milling plant had been loaded into three 40HQ containers and would be shipped to Nigeria. Shanghai was locked down for two months due to suffered COVID-19. The client had to stock all his machines in our company.